







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Trusted Fence Installation for Berkeley Homeowners
Fence Installation in Berkeley usually comes down to one of two situations: a fence that’s failing and needs replacing, or a property line that has never had a proper boundary. Both are solved the same way, with a clear layout, sound posts set below the surface, and materials chosen for the specific exposure of your lot. Our technicians have up to 9 years of experience, we source fencing from manufacturers like ActiveYards, Barrette, and Master Halco, and we give written, line-item estimates before anything gets dug. We answer 24/7 at (844) 797-8850, with fast dispatch from 7am to 7pm, Sunday through Friday. Fence work on flat Alameda County lots can often be scheduled the same day.

Key Takeaways
- Typical estimated cost for a vinyl fence in Berkeley: $4,130 – $10,620. Aluminum: $4,720 – $11,800.
- We source fencing from ActiveYards, Barrette, and Master Halco, with wood, chain link, vinyl, aluminum, and iron all in scope.
- Every project starts with a free written estimate that sets the final price, so there are no change orders once work begins.
- We handle gates, repairs, privacy builds, and light commercial fencing under the same contractor relationship.
What Our Fence Installation Service Includes

We install and repair fencing across the full residential range, and we source the panels, posts, and hardware from the same name-brand manufacturers we use on our other exterior work. That matters because a fence is a structural system, not a product you drop in a hole. The post footing, the plumb line, and the gate swing all decide whether the fence still looks right five years from now.
Wood Fence
A wood fence is the most common choice in Berkeley’s older residential blocks, where lots are narrow and the fence does most of the visual work between neighbors. You need it when an existing board fence has gone soft at the base, or when you’re establishing a boundary for the first time. We build wood fencing with proper post spacing, ground-contact-rated lumber where it meets soil, and a top rail configuration matched to the height you need.
Chain Link Fence
Chain link is the practical answer for side yards, dog runs, and property lines where visibility isn’t the concern. It goes up quickly and takes abuse. We install chain link with tension bands and rails sized to the span, set posts to a consistent depth, and finish the top rail so it doesn’t sag at the midpoint over a long run.
Vinyl Fence
Vinyl fencing has become the default privacy choice on newer Berkeley lots because it never needs painting or staining. You want it when maintenance is the deciding factor and you’d rather not think about the fence again. We set vinyl panels on posts rated for the wind exposure of an open hillside lot and confirm the manufacturer’s own product warranty terms with you before ordering. Typical vinyl fence installation in Berkeley runs $4,130 – $10,620 depending on run length, height, and gate count.
Aluminum Fence
Aluminum fencing gives you the look of wrought iron with a much lighter structure, which suits sloped yards and view lines. It’s the right call when you want a boundary that doesn’t block light or sightlines, particularly on a lot that steps down toward the street. We install aluminum fence systems from ActiveYards and similar manufacturers, with racked panels that follow grade instead of stair-stepping. Estimated aluminum fence installation in Berkeley runs $4,720 – $11,800.
Iron Fence
Iron and ornamental steel fencing is the heavier option, and it’s what we recommend where security and permanence outweigh the cost of the material. You need it when a fence doubles as a real barrier rather than a marker. We install iron fencing with welded panel sections, set posts in concrete footings sized to the panel weight, and finish gates with hardware built for daily use. Because iron is heavy and unforgiving during installation, this is work we don’t recommend attempting without proper lifting and setting equipment.
Fence Repair
Repair is often the smarter spend than replacement, and we’ll tell you which one you’re looking at. Leaning posts, a gate that drags, a split rail, or a panel that pulled loose in a wind event are all fixable without tearing out the whole run. We inspect the footing first, since a post that failed at the base can’t be saved by reattaching the panel above it.
Beyond the standard panel types, we also handle privacy fence builds, fence gates including driveway and pedestrian gates with proper hardware, and commercial fencing for small commercial properties that need a boundary or screening run. If your project touches the driveway too, our Construction Berkeley team covers hardscape on the same scope.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Brands We Service for Fence Installation
We work with ActiveYards systems and know how their vinyl and aluminum panel lines are assembled, which matters when a homeowner wants a specific profile and needs the posts and rails to match. We also install Barrette fencing, and we understand how their panel and post compatibility works so a replacement section blends into an existing run instead of standing out as a mismatch.
Master Halco covers a broad range of chain link and ornamental products, and we’ve installed enough of it to know where the components wear, particularly gate hinges and post caps on exposed runs. Whether you have ActiveYards, Barrette, Master Halco, or any other make, we can help.
Signs You Need Fence Installation Right Now
- Posts leaning after a wind event. A post that has shifted out of plumb usually means the footing has failed or was never deep enough. Left alone, the panels above it start to twist and the whole run follows within a season.
- Soft or crumbling wood at the base. Push a screwdriver into the bottom six inches of a post. If it sinks easily, the wood is gone and no amount of bracing will bring it back. This is the single most common reason a wood fence gets replaced rather than repaired.
- A gate that drags or won’t latch. Gate failure is usually a hinge or post problem, not a gate problem. It’s a real safety issue if the gate is on a driveway or a pool-adjacent boundary, because a gate that doesn’t latch isn’t doing its job.
- Missing or broken panels along a property line. Open gaps invite both intrusion and disputes with neighbors. Replacing the damaged section early keeps the rest of the run from taking the load.
- You’re adding a dog, a pool, or a rental unit. New fencing requirements often arrive with a life change, not a failure. Planning the fence alongside the rest of the project keeps the layout sensible and avoids tearing out work you just paid for.
Our Fence Installation Process – Step by Step
- 1
Site walk and property line check. We walk the run with you, confirm where the line actually sits, and flag anything that will affect the layout, like a slope, a root system, or a utility easement. We also talk through height limits, since most cities require a permit above a certain height and Berkeley is no exception.
- 2
Material and layout planning. We match the material to the exposure and the look you want, then lay out post spacing and gate positions on the ground. This is where a good fence gets decided, long before a shovel goes in.
- 3
Footing and post setting. Posts go in at a consistent depth and are set plumb, with concrete footings sized to the panel type and the wind load of the location. We check plumb with a level at every post, not just the first one.
- 4
Panel, rail, and gate installation. Panels go up level and true, gates get hardware rated for daily use, and we check the swing and latch on every gate before we call it done. Racked panels follow grade on sloped lots rather than stepping down in visible jumps.
- 5
Final walkthrough and cleanup. We walk the finished fence with you, check the gate operation one more time, and haul away all offcuts and packaging. Any inspection the work requires gets passed before we close the job.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Fence Installation Cost in Berkeley?
Fence pricing in Berkeley tracks the run length, the material, and the number of gates, and a hillside lot adds labor because posts have to be stepped and panels racked to follow grade. A typical vinyl fence installation in Berkeley runs $4,130 – $10,620 depending on linear footage, height, and how many gates you need. Aluminum fencing installation typically runs $4,720 – $11,800, driven by panel style and whether the run includes a driveway gate.

What moves the number most:
- Linear footage and height. Both scale the material cost directly.
- Post footings. A sloped or rocky lot means more digging and more concrete.
- Gate count and hardware. A driveway gate costs more than a pedestrian gate.
- Removal and haul-away. Taking out an old fence is real labor, and it’s easy to underestimate.
- Permits. Most cities require a permit for fencing above a standard height, so ask the city’s building department what applies to your lot.
To avoid overpaying, compare estimates on the same scope, not on the same headline number. A bid that leaves out removal, footings, or hardware isn’t cheaper, it’s incomplete. Every free estimate we write is line-item, so you can see exactly what each part of the job costs, and the written estimate sets the final price. No change orders once work begins.
Fence Installation Near Berkeley – Our Service Area
We work throughout Berkeley and the surrounding East Bay, including Emeryville, Albany, El Cerrito, Richmond, San Pablo, El Sobrante, and Pinole, plus San Francisco and the Marin towns of Tiburon, Corte Madera, and Tamalpais-Homestead Valley. For nearby projects we schedule quickly, and we can often reach an address in Emeryville or Albany the same day. If you’re comparing options across the area, our fence installation page covers Emeryville, and our team handles fence installation in Albany as well.
Serving Berkeley, CA – Our Local Coverage Area
We serve Berkeley and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Fence Installation in Berkeley

Fence installation is the process of setting posts in the ground at a consistent depth, then attaching panels, rails, and gates to form a boundary or privacy screen. It’s a structural job, not a decorative one, because the fence has to hold up to wind and to the weight of its own panels. We handle layout, material sourcing, footings, panel and gate installation, and the cleanup afterward. Call (844) 797-8850 to schedule a free estimate.
A typical residential run takes one to several days, depending on footage, material, and how many gates are involved. Ground conditions matter more than people expect: a flat lot with easy digging goes fast, while a sloped or rocky site with stepped posts takes longer. We give you a realistic timeline in the written estimate rather than a guess on the phone. Call (844) 797-8850 for an exact quote, since estimates are free.
Vinyl fence installation typically runs $4,130 – $10,620, and aluminum installation typically runs $4,720 – $11,800 in Berkeley. The range covers footage, height, gate count, and site conditions, so two homes on the same street can land in very different places. Call (844) 797-8850 for an exact quote. Estimates are free and written line by line.
Yes. We install ActiveYards, Barrette, and Master Halco fencing, and we know how the panel and post systems fit together across those lines. That knowledge matters most on repairs, where a replacement section has to match an existing run rather than stand out. Call (844) 797-8850 to talk through the specific product you’re considering.
Same-day service is often possible on flat lots in Berkeley when the material is available. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening.
Installation workmanship is what we stand behind, and the material warranty comes from the manufacturer itself, so terms vary by product line. We go over the manufacturer’s own product warranty on the specific fencing you choose before you commit. It’s one more reason to see the product terms in writing before the order goes in. Call (844) 797-8850 with the product in mind and we’ll walk you through it.
Clear the line of anything movable: patio furniture, planters, hoses, and anything parked along the run. Mark any buried irrigation or lighting lines you know about, and let your neighbor know what’s happening if the fence is on a shared boundary. Beyond that, we handle the rest, including removal of the old fence. Call (844) 797-8850 to schedule your free estimate.
Schedule Your Fence Installation Service in Berkeley Today
A fence is one of the few home improvements that pays back every day, in privacy, in security, and in how the property reads from the street. We’ll walk the run with you, put the material options side by side, and give you a written line-item estimate at no cost and with no obligation. Call (844) 797-8850 to schedule your free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Berkeley.












