







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Berkeley Homeowners Choose PGT Construction
We provide independent PGT construction service in Berkeley: window and door repair, window replacement, and the flashing and roof work that keeps PGT openings weather-tight. Our PGT work starts with the product itself – WinGuard aluminum and vinyl units, Premier and Architectural Series sliders – and ends with the envelope around it, because a good window in a bad opening still leaks. We are not affiliated with, authorized by, or sponsored by PGT, and we make no warranty promises on the manufacturer’s behalf. What we do offer is field judgment built on thousands of openings. Our technicians have up to 9 years of experience, and Berkeley’s older, tightly regulated housing stock rewards that patience. Call (844) 797-8850 to schedule a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Trust Construction Berkeley for Your PGT Construction?

PGT products are engineered tightly, which means a repair either fits right or it doesn’t. Our technicians read date-code stamps before they touch a unit, so the balance, roller, or glazing bead we bring matches the sash in front of us instead of the one the catalog assumes. We work on WinGuard single-hung and sliding vinyl windows, aluminum WinGuard units, and Premier and Architectural Series sliding glass doors weekly, and we’ve learned where each type tends to fail first.
Quality parts matter more on PGT hardware than on most brands. A balance with the wrong tension rating lets a sash drop mid-tilt. A roller with a mismatched wheel diameter binds on the track and loads the frame. We source OEM PGT hardware when a direct match is available and use quality aftermarket equivalents for discontinued profiles, so a window never sits inoperable waiting on a part.
Warranty-safe practice is part of the job. That means no drilling into a factory frame to force a fit, no sealing over a weep system, and no caulking a flange that should have been flashed. We’re a single-source contractor, so the same relationship covers the roof repairs and kitchen remodeling that often surround a PGT project in Berkeley.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common PGT Construction Problems We Fix in Berkeley
PGT units fail in predictable ways, and Berkeley’s climate pushes several of them harder than a dry inland market would. Here’s what we see most.
- Failed sash balances and tilt-latch hardware on WinGuard single-hung vinyl units. Sashes that won’t stay up, or drop the moment they’re tilted, almost always point to a balance that’s lost tension or a latch that’s worn past its catch. The glass is usually fine. The hardware isn’t, and it’s a repairable problem when the right tension rating goes back in.
- Roller and track wear on WinGuard sliding glass doors. Drag, binding, and water at the sill come from bottom rollers that have flat-spotted and a nylon track that’s grooved. Once the panel stops seating squarely, the sill seal can’t do its job and Berkeley’s wind-driven rain finds the gap.
- Perimeter water intrusion from missing head flashing or failed backer rod and caulk. This is the one owners blame on the window when the window is innocent. Factory flanges need correct laps and proper flashing at the head; when that’s skipped, water tracks behind the frame and shows up as a leak nowhere near the actual breach.
- Fogged or failed insulated glass units on aluminum WinGuard frames. Seal failure clouds the glass from the inside and can’t be cleaned away. Coastal fog and daily thermal cycling in Berkeley work the perimeter seal over time, and it’s a common call on west-facing elevations.
- Deformed or cracked vinyl weeps and sill screens. Wind-driven rain against west-facing walls punishes these small components first. A crushed weep stops draining, water pools in the sill track, and the next storm pushes it inside.
Not every one of these means replacement. Most mean the right part, installed correctly, with attention to what’s happening at the opening.
PGT Parts & Our Repair-vs-Replace Approach

We source OEM PGT hardware – balances, rollers, tilt latches, glazing beads, and weeps – when a direct match is available, and we use quality aftermarket equivalents for discontinued profiles or hard-to-find parts where OEM lead times would leave a window inoperable. We don’t claim to stock genuine PGT parts; we source what fits the unit in front of us.
The repair-or-replace call comes down to the frame and the glass. If a PGT frame is sound but one sash or one insulated glass unit has failed, repair is the honest answer and usually the durable one. If the frame is racked, or the flashing was botched from day one and water has been tracking behind it, replacement is the more durable call. A racked frame can’t be sealed back into square, and a bad opening will fail a new unit the same way it failed the old one.
Call (844) 797-8850 and we’ll tell you which side of that line your PGT unit falls on – estimates are free.
Our PGT Service Process – Step by Step
- 1
Diagnosis. We identify the PGT product, read the date-code stamp, and test the actual failure – balance tension, roller drag, glass seal, weep drainage, and the flashing at the head and sill. What looks like a window problem often traces to the opening.
- 2
Repair or install. We replace the failed hardware with a matched part, or set a new unit with correct flashing, backer rod, and caulk. Factory flanges get the laps they were designed for.
- 3
Test. We cycle every sash and slider through its full travel, check that it latches, seats, and locks, then water-test the sill and head where access allows.
- 4
Warranty. We document the work and the parts used, and we point you to the manufacturer’s own warranty terms for the product itself. We don’t make PGT warranty claims on their behalf.
See the difference
Before
After
Before
After
Before
AfterPGT Products We Service & Install in Berkeley
We service PGT WinGuard aluminum impact-resistant windows, WinGuard vinyl single-hung and sliding windows, Premier and Architectural Series sliding glass doors, and WinGuard sliding glass door systems. That covers hardware replacement, insulated glass unit replacement, sill and track repair, and full replacement when the frame has given up. Most of our PGT work in Berkeley pairs window repair with roof and flashing judgment, because the two meet at the head of every opening – and that’s exactly where water gets in on hillside homes with roof-to-wall terminations.
We Also Service These Brands
We’re a multi-brand contractor, not a single-brand shop. Alongside PGT we work with KraftMaid cabinetry and Kohler fixtures on interior projects, GAF roofing systems on the roof side, and Master Halco fencing for the property line. That range lets one contractor relationship carry a project from the window opening to the kitchen – and keeps you from juggling separate trades.
FAQs – PGT Construction Service in Berkeley

No. A sash that slides down on its own almost always has a failed balance, not a bad window. Replacing the balance with one of the correct tension rating restores the hold, and the glass and frame usually have plenty of life left. Call (844) 797-8850 to get it looked at – estimates are free.
Yes, in most cases. A fogged unit is a seal failure in the glass, not a failure of the frame or the sash. When the frame is sound, we replace the insulated glass unit on its own and leave the rest of the assembly in place. That’s the honest repair, and it costs far less than a new window.
The leak is usually the sill end-dam, deteriorated caulk, or a clogged weep system, not the door itself. Berkeley’s wind-driven rain pushes water sideways into the track, and if the drainage path is blocked or the end-dam has failed, it spills inside. Call (844) 797-8850 for a free estimate on the fix.
Repair wins when the frame is square and the glass is intact – balances, rollers, tilt latches, glazing beads, and weeps are all replaceable hardware. Replacement is the better call when the frame is racked or the flashing at the opening was wrong from the start. Call (844) 797-8850 and we’ll give you a straight answer with a free estimate.
Yes. Any roof-to-wall junction needs head flashing with correct laps and a drainage plane behind the window flange, and hillside homes take more wind-driven rain at that termination than flatland walls do. Missing or reversed laps are the reason a perfectly good window leaks. Call (844) 797-8850 – we’ll check the flashing as part of the window estimate.
We use quality parts that fit PGT equipment – OEM hardware when a direct match is available, quality aftermarket equivalents for discontinued profiles – and correct installation practice protects your warranty rather than voiding it. We’re independent, so we don’t interpret PGT’s warranty terms for you; check them directly for any coverage claim. Call (844) 797-8850 for a free estimate.
These are typical estimated ranges for the work we do around PGT openings in Berkeley. The written estimate sets the final price.
| Service | Typical Estimated Range |
|---|---|
| Window Replacement | $5,310 – $17,700 |
| Roof Repair | $470 – $2,125 |
| Roof Replacement | $9,440 – $23,600 |
Window hardware repair on a single unit usually lands well below replacement cost. Call (844) 797-8850 for an exact quote – estimates are free.
Book Your PGT Service in Berkeley, CA
Whether it’s a WinGuard sash that won’t hold, a slider leaking at the sill, or a fogged unit you’d rather repair than replace, we’ll give you a straight read and a written estimate. Call (844) 797-8850. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, closed Saturday. Estimates are free, and the written estimate sets the final price.
Written by the team at Construction Berkeley.












